Project Description
!!!!!SOLD!!!!! This is a full size percussion pocket knife pistol made by Walter Agnoletto of Turin, Italy. Mr. Agnoletto’s work is featured in Merrill Lindsay’s book “Miniature Arms”. 3 3/8″ long overall with everything closed. The stainless steel clip point knife blade is 2 3/8″ long. The spring loaded square percussion pistol barrel is 1 3/4″ long & is engine turned on both sides & the bottom. The top of the barrel a high polish nitre blue. There is some nice file work on the knife blade spring & the rear spine of the blade. Ivory scales with a nice aged patina, brass escutcheons, with two screws on each side, & an inlaid oval German silver escutcheon. There is a checkered oblong knob on the back side of the handle that when pressed toward the end opposite the hammer releases the rifle barrel which then springs up & must be manually brought back & locked into place. The hammer is then manually cocked & released by the button on the barrel side of the knife. The blade is then released to fold back down by sliding the release button & folding it down into place. Complete with a brass powder flask which has some corrosion at the tip if the spout & where the spout enters the body. Plus a nice nitre blue cross shaped tool that is a screwdriver on one end and the ramrod on the other. The original Agnoletto walnut case has a hinged top with hook latches. The top inlaid in a four point star with maple & ebony. The case interior French fit & lined in red felt, with the interior lid padded. There are two corner compartments with brass knobs. One containing some percussion caps & the other some proper lead balls. Excellent near mint condition. Stock # CK-24. !!!!!SOLD!!!!!







































