Project Description
!!!!!SOLD!!!!! This is a 1/3 scale Mosin Nagant bolt action repeating sniper rifle with scope & suppressor made by Miniart in Moscow, Russia about 25 years ago. 13 5/16″ long overall with a 7 3/16″ round barrel. 18 1/8″ long including the suppressor. 16″ long without the suppressor. Dovetailed windage adjustable hooded front sight.  Elevation adjustable rear sight. The cleaning rod is fit under the barrel, and screws into the receiver to hold it in place. Two barrel bands held in place by springs inlet into the stock on the right side. There are inlaid oval escutcheons on each side of the forearm and the buttstock with a slot for attaching a leather sling. Most of the steel parts are blued with the exception of the steel bolt assembly, trigger, and German silver sling escutcheons, all of which are finished in the white. The bolt has a turned down handle for scope clearance. The magazine has a drop floorplate secured by a latch just in front of the triggerguard. The sight adjustment knobs are checkered. The outer edge of the bolt knob is serrated. The top of the bolt marked “MADE IN RUSSIA”. The scope has glass lenses front & back, but no cross hairs or internal parts & is not functional. The top of the scope marked with a five point star over the Soviet hammer & sickle, over what looks like a backwards capital D with an arrow running through it from right to left. The scope’s windage & elevation knobs have knurled edges, and there are graduations markings on both. The scope has a quick detachable mount. Scopes were Typically kept in a special case when not in use, plus if the scope was damaged, the shooter could remove it & use the standard sights. The suppressor has a bayonet type attachment in that it slides on then twist 1/4 turn to the right. The suppressor is marked 100/7 over 150/8.5 over 200/9.5 over 250/11 over 300/12. The front part of the suppressor is knurled, and will unscrew from the rear part. There are no internal baffles and there is a gray plastic plug in the front part which should be removable. Two piece walnut stock and handguard. The top rear of the receiver & the side of the bolt numbered 005. The scope mount & suppressor also marked with the serial # 005. The rear sight has the distance graduation markings. Includes one round solid steel machined dummy cartridge that will feed, chamber, extract, & eject when the action is cycled manually. Beautiful mint as new condition. Only six of these were made by Miniart, and this is the first one I have ever been able to offer for sale! !!!!!SOLD!!!!!
