!!!!!SOLD!!!!! David Pedersoli Full Scale Remington Ryder Percussion Vest Pocket Single Shot Pistol With Case Colored Finish, Cased !!!!!SOLD!!!!!

!!!!!SOLD!!!!!  This is a full-scale reproduction of the Remington Ryder percussion vest pocket single shot pistol made by David Pedersoli in Italy.  4 3/4″ long overall with a 3 1/16″ button rifled barrel, with 10 lands & 10 grooves, of .175 caliber, or 4.3mm.  The pistol is all steel, including the grip.  The one-piece frame, barrel, & right grip are case colored, as is the removable left side plate & grip.  The balance of the parts are blued.  The hammer has full cock only and has a serrated spur.  Round post front sight, dovetailed “V” notch rear sight.  There are proof markings on the left upper frame flat, on the left side of the frame that are shown the photos.  Serial # H3650 stamped into the left side of the frame along with the “PEDERSOLI” name & “DP” in an oval which is the Pedersoli logo.  there is also a “N” stamped into the frame in an irregular outline.  The bottom of the barrel stamped “PRIMER ONLY – ITALY CAL 4.3”.  The pistol has a removable percussion chamber that is intended to take a # 11 percussion cap & a .177″ lead ball.  It is expressly stated NOT to use steel BB’s, or any type of additional powder or propellant, only the # 11 percussion cap.  The chamber is removed by cocking the hammer, lifting the lever on the right upwards, then pulling it backwards to remove for loading, much like operating a bolt action rifle.  The piece is pristine new in the original walnut hinge top case with swivel latch.  Also included is an empty Eley white label brass lift top cap tin.  This is not considered to be a firearm, & no FFL is required.  Can be legally owned and shipped to MOST states, check your local laws.  Buyer assumes all risk & liability for the ownership & use of this pistol.  !!!!!SOLD!!!!!