Cases

!!!!!ON HOLD!!!!! Walnut Casing For Miniart 1/2 Scale Colt 1911 or 1911 A1 !!!!!ON HOLD!!!!!

!!!!!ON HOLD!!!!!  This is a hinged top walnut casing with flip down latch made by an unknown maker to fit the Miniart 1/2 scale Colt 1911 A1.  It would also work fine for the Miniart […]

Unfinished Walnut Casing For Uberti 47% Scale Revolvers Or Similar Size Miniatures

Project Description
This is a walnut hinged top casing for a 47% scale Uberti Colt revolver or other similar sized miniatures.  The case was made by Imperial Miniature Armory in Richmond, Texas.  Magnetic closures.  The top […]

Uberti Oak Casing For 47% Scale Colt Single Action Army Revolver

,

This is an original Uberti oak casing for their 47% scale Colt single action army revolvers.  This will fit the 4 3/4″, 5 1/2″, and 7 1/2″ models.  Outside dimensions are 7 1/4″ X 3 […]

1/2 Scale Colt Key Lock For Wood Casings

,

This is a 1/2 scale case lock specifically made for miniature Colt wood casings, but which will of course work for any miniature gun casing.  These were made by Roberto Hinze in Houston, Texas about […]

IMA Walnut Casing For Uberti Colt Single Action Army Revolver With 7 1/2″ Barrel With Unfitted Interior

This is a walnut hinged top casing for a Uberti Colt single action army revolver.  The case was made by Imperial Miniature Armory in Richmond, Texas.  There is no lock, latch, or magnetic closure.  The […]

Uberti Oak Casing for 47% Scale Colt Single Action Army Revolver

This is an original Uberti oak casing for their 47% scale Colt single action army revolvers.  This will fit the 4 3/4″, 5 1/2″, and 7 1/2″ models.  Outside dimensions are 7 1/4″ X 3 […]

Large Unfitted Oak & Leather Casing For 1/3 Scale Rifles, 1/2 Scale Take Down Rifles, or Multiple Pistols

This is a very high quality oak and leather large luggage type casing for a 1/3 scale rifle, a 1/2 scale takedown rifle, or  multiple pistols or revolvers with accessories  The outside is covered in […]

OAK & LEATHER LUGGAGE TYPE CASING FOR A COLT SAA WITH 5 1/2″ BARREL With Laser Etched Colt Lgo

This is a very high quality oak and leather luggage type casing that has been laser etched with the Colt logo, for a pistol about the size of a 47% scale Uberti Colt single action […]

Pine Shipping Crate Casing For Uberti 47% Scale Colt Walker Percussion Revolver

This is a pine shipping crate type casing made by Imperial Miniature Armory to fit the Uberti or U.S. Historical Society 47% scale Colt Walker revolvers.  Would also work for the Uberti Colt dragoon revolvers. […]

Gerstner 4 Drawer Quarter Sawn Oak Miniature Machinist Tool Chest

,

Back in stock!  New lower price!!!

Great ideas can come in small packages, and the Gerstner International Mini-Max Chest is proof with its Mini Size and Max Versatility.

Put the Mini-Max in your office to organize your desk […]

OAK & LEATHER LUGGAGE TYPE CASING FOR A COLT SAA WITH 5 1/2″ BARREL OR SIMILAR SIZED PISTOL

This is a very high quality oak and leather luggage type casing for a pistol about the size of a 47% scale Uberti Colt single action army revolver with a 5 1/2″ barrel.  The outside […]

Oak & Leather Luggage Type Casing For A Colt SAA With 4 3/4″ Barrel Or Similar Sized Pistol

This is a very high quality oak and leather luggage type casing for a pistol about the size of a 47% scale Uberti Colt single action army revolver with a 4 3/4″ barrel.  The outside […]

Walnut Casing For Miniart P-08 Luger Semi-Auto Pistol With Manual & Cartridge Box

This is a hinged top walnut casing with key lock made by Wayne Hoosier of Dickenson, Texas to fit the Miniart 1/2 scale Erfurt and Kreighoff P-08 Luger semi-automatic pistols.   The case top has […]

Walnut Casing For Miniart 1/3 Scale Colt Paterson Revolver & Accessories

This is a walnut casing only for a 1/3 scale Colt Paterson percussion revolver & accessories as made by Miniart in Moscow, Russia.  The casing was made by Imperial Miniature Armory in Richmond, Texas.  Hinged […]

U.S. Historical Society Colt SAA “Classic Edition” Mahogany Casing Only

This is an original United States Historical Society hinged top mahogany casing with slide latch for their “Classic Edition” Colt single action army revolver.  The front right corner of the top is marked with the […]

Colt SAA Marked Walnut Casing, Lined, But Not Fitted

This is a walnut casing with the lid laser engraved with the Colt logo and 1873 Single Action.  The interior is lined in a russet suede, but is not fitted for a revolver.  Magnetic latches. […]

Miniart Deluxe Walnut Case For 1/4 Scale Thompson 1928 And M-1

, ,

This is a deluxe walnut case made by Miniart in Moscow, Russia for their 1/4 scale Thompson sub-machine guns models 1928 and M-1.  Outside dimensions are 14 1/16″ X 5 3/8″ X 1 13/16″.  Inside […]

IMA 1/2 Scale Canuck Wood Shotshell Crate

, ,

This is a 1/2 scale empty crate for 20 boxes of Canuck 16 gauge shotshells made by Imperial Miniature Armory of Richmond, Texas.  Outside dimensions are 7 9/16″ wide (not counting the wood handles), 4 […]

Walnut Casing With Accessories For Uberti Colt Single Action Army Revolver

,

This is a walnut hinged top casing made by Imperial Miniature Armory for the Uberti or U.S. Historical Society Colt single action army revolvers.  This will fit any of the barrel lengths up and including […]

47% Scale Walnut Casing For Uberti Colt Single Action Army Revolver

This is a walnut hinged top casing for a Uberti Colt single action army revolver made by Imperial Miniature Armory in Richmond, Texas.  There is no lock, latch, or magnetic closure.  The top is 4-D […]

Glass Top Casing For Uberti Or USHS 47% Scale Colt 1851 Navy Percussion Revolver

This is a hinged glass topped casing for the Uberti or United Stated Historical Society 47% scale Colt 1851 navy percussion revolver.  It is very similar and patterned after the USHS Presidential Edition cases.  Outside […]

1/4 Scale Crate Type Casing For Miniart M-1 Thompson Sub-Machine Gun

This is a crate type casing for a Miniart 1/4 scale Thompson sub-machine gun made by Wayne Hoosier of Dickenson, Texas.  Outside dimensions are 9 1/2″ X 3 1/4″ X 2″.  Made for the Miniart […]