Accessories

Paul Hamler 47% Scale Army & Navy Powder Flask

This is a 47% scale powder flask made by master miniature maker Paul Hamler and suitable for casing or displaying with your United States Historical Society or Uberti Miniature Colt 1851 Navy, 1860 Army, or […]

Dennis Holland 1/2 Scale Ivory & Ebony Rifle Or Shotgun Cleaning Kit With Walnut Case

, , ,

This is a 1/2 scale ivory & ebony rifle cleaning kit made by master ivory carver Dennis Holland of Lubbock, Texas.  Includes a two piece ebony rifle cleaning rod with ivory handle that measures 16 […]

Unknown 1/6 Scale “Cat’s Head” Neck Restraint

, , ,

This is a neck capture or restraint devise known as a “Cat’s Head Restraint” by an unknown maker.  It was used to capture & subdue people from medieval times up unto the slave trading days, […]

Unknown 1/2 Scale Brass Oil Bottle

This is a 1/2 scale brass oil bottle by an unknown maker.  5/8″ in diameter, 13/16″ tall.  Machined yellow brass construction with a threaded lid.  A terrific accessory for most any 1/2 or 47& scale […]

David Kucer 47% Scale Cap Tin For Uberti & USHS Percussion Colt Revolvers

,

This is a 47% scale Eley Brothers cap tin made by master miniature maker David Kucer of Canada as an accessory for the 47% scale Uberti & USHS Colt percussion revolvers.  11/16″ in diameter, 9/16″ […]

Carmen Gianforte 47% Scale Colt Percussion Navy Or Army Nipple Wrench

This is a 47% scale nipple wrench made by Carmen Gianforte as an accessory for the Uberti and U.S. Historical Society Colt percussion 1851 Navy, 1860 Army, and 1861 Navy revolvers.  The screwdriver leg is […]

Vic Williams 47% Scale Brass Bullet Mold With Blue Sprue Cutter For Uberti Or USHS Colt Walker Or Dragoon

,

This is a 47% scale yellow brass bullet mold with blue steel sprue cutter made by master miniaturist Vic Williams of Nevada for the Uberti or U.S. Historical Society Colt Walker percussion revolvers and also for […]

Wayne Driskill Miniatures 1/2 Scale AR-15 80% Finished Lower Receiver Bottle Opener

, , ,

This is a 1/2 scale 80% finished Lower receiver for an AR-15 rifle.  I had these custom made with my graphics on them as you can see from the photos.  Note the MOD AR 7.5 […]

100 Round .22 Long Rifle Rimfire Broadwell Drum Magazine For Valley Engraving or Thunder Valley Miniature Gatling Guns

, ,

This is a 100 round .22 long rifle rimfire Broadwell drum magazine made by Valley Engraving (Thunder Valley, Mike Suchka, Neal Smith) for their miniature Gatling guns, both carriage and tripod types.  Cast and sheet […]

Roberto Hinze Bronze & Sterling Silver 1/4 Scale Bison & Eagle Spurs

, ,

This is a pair of 1/4 scale spurs made by Roberto Hinze in Houston, Texas about 15 – 20 years ago.  The basic spur is cast bronze, and is decorated with a sterling silver bison […]

!!!!!Price Reduced!!!!! Unknown 1/3 Scale Iron Or Steel Powder Flask For Flintlock Or Percussion Kentucky/Pennsylvania Rifle

!!!!!Price Reduced!!!!!  This is a 1/3 scale powder flask made of iron or steel, it is magnetic, suitable for a 1/2, 2/5, or 1/3 scale flintlock or percussion Kentucky or Pennsylvania rifle.  4 3/8″ long […]

!!!!!Price Drastically Reduced!!!!! Display Stand For 1/2 Scale Barrett, Miniart, Uberti, And Other Rifles Or Carbines. Several Available In Different Lengths & Woods

!!!!!Price Drastically Reduced!!!!!  This is a display stand made to display Mike Barrett, Miniart, or Uberti Rifles or carbines, made by Wayne Hoosier of Dickinson, Texas.  I’m sure there are a number of other rifles […]

!!!!!Price Reduced!!!!! Miniature Or Cadet Size Military Spurs Salesman’s Sample Set Of Six Different Spurs

, ,

!!!!!Price Reduced!!!!!

I believe this to be a salesman’s sample set of military spurs, probably not actually miniature, but child or cadet size.  The spurs are all basically identical with the exception of the rowels.  There […]

Antique Miniature Child Size Pair Of Engraved Silver Mounted Spurs

,

This is an antique pair of child size Mexican style silver mounted spurs by an unknown maker.  The Yoke part of the spur where the boot heel would fit measures 1 3/4″ wide and 1 […]

Miniature Child Size Pair Of Silver Mounted Spurs

,

This is a pair of child size silver mounted spurs by an unknown maker.  The Yoke part of the spur where the boot heel would fit measures 2″ wide and 1 5/8″ deep.  The overall […]

Roberto Hinze Bronze & Sterling Silver 1/4 Scale Horse Head Spurs

,

This is a pair of 1/4 scale spurs made by Roberto Hinze in Houston, Texas about 15 – 20 years ago.  The basic spur is cast bronze, and is decorated with a sterling silver horse […]

Roberto Hinze Bronze & Sterling Silver 1/4 Scale Five Point Texas Star Spurs

,

This is a pair of 1/4 scale spurs made by Roberto Hinze in Houston, Texas about 15 – 20 years ago.  The basic spur is cast bronze, and is decorated with sterling silver 5 point […]

Roberto Hinze Bronze & Sterling Silver 1/4 Scale Longhorn Spurs

,

This is a pair of 1/4 scale spurs made by Roberto Hinze in Houston, Texas about 15 – 20 years ago.  The basic spur is cast bronze, and is decorated with a sterling silver longhorn […]

Roberto Hinze Sterling Silver & Bronze 1/4 Scale Rattle Snake Spurs

,

This is a pair of 1/4 scale spurs made by Roberto Hinze in Houston, Texas about 15 – 20 years ago.  The basic spur is cast sterling silver, and is decorated with bronze strap retainers […]

Roberto Hinze Sterling Silver & Bronze 1/4 Scale Flying Hiney Spurs With Interesting Rowels

,

This is a pair of 1/4 scale spurs made by Roberto Hinze in Houston, Texas about 15 – 20 years ago.  The basic spur is cast sterling silver, and is decorated with bronze strap retainers […]

Roberto Hinze Bronze & Sterling Silver 1/4 Scale Five Point Texas Star & Texas State Shape Spurs With Five Point Star Rowels

,

This is a pair of 1/4 scale spurs made by Roberto Hinze in Houston, Texas about 15 – 20 years ago.  The basic spur is cast bronze, and is decorated with a sterling silver 5 […]

Roberto Hinze Bronze & Sterling Silver 1/4 Scale Five Point Texas Star & Texas State Shape Spurs

,

This is a pair of 1/4 scale spurs made by Roberto Hinze in Houston, Texas about 15 – 20 years ago.  The basic spur is cast bronze, and is decorated with a sterling silver 5 […]

Roberto Hinze Bronze & Sterling Silver 1/4 Scale Diamond & Heart Gal Leg Spurs

,

This is a pair of 1/4 scale bronze & sterling silver spurs made by Roberto Hinze in Houston, Texas about 15 – 20 years ago.  The basic spur is cast bronze, and is decorated with […]

Roberto Hinze Bronze & Sterling Silver 1/4 Scale Five Point Texas Star Spurs

,

This is a pair of 1/4 scale spurs made by Roberto Hinze in Houston, Texas about 15 – 20 years ago.  The basic spur is cast bronze, and is decorated with sterling silver 5 point […]

Carmen Gianforte 3mm Pin Fire Dummy Cartridges For some 6 & most 7 Shot Ring Guns

, ,

These 3mm pinfire dummy cartridges were made for ring guns by Carmen Gianforte, a master miniature firearms maker, a master machinist, and also a past President of the Miniature Arms Society. The cartridges are .127″ […]

Carmen Gianforte 4mm Pinfire Dummy Cartridges for 4, 5, & some 6 Shot Ring Guns

, ,

These 4mm pinfire dummy cartridges were made for ring guns by Carmen Gianforte, a master miniature firearms maker, a master machinist, and also a past President of the Miniature Arms Society.  The cartridges are .156″ […]

Miniart 1/2 Scale Wood Shoulder Stock For Artillery, Navy, And Some P-08 Lugers

, ,

This is a 1/2 scale wood shoulder stock for Luger pistols made by Miniart in Moscow, Russia about 20 years ago.  The wood is walnut with a varnished finish.  Mint condition.  This may have to […]

Miniart 1/2 Scale Artillery Luger Cleaning Rod

This is a 1/2 scale cleaning rod made by Miniart in Moscow, Russia, for their 1/2 scale Artillery Luger.  4 15/16″ long overall including the serrated ringed walnut handle.  The rod itself is 4 9/16″ […]

Miniart 1/2 Scale Navy Luger Cleaning Rod

This is a 1/2 scale cleaning rod for a Navy Luger made by Miniart in Moscow, Russia.  3 7/8 long overall.  The rod itself is 3 1/2″ long with a jagged end.  The perfect accessory for […]

50 Rounds Of .170″ Diameter Swaged Lead Shot, The Perfect Size For The Uberti 47% Scale Miniature Colt 1851 & 1861 Navy Percussion Revolvers

, , , ,

This is 50 rounds of .170″ diameter swaged lead shot that is the perfect size lead projectile, ball, or bullet for the Uberti 47% scale caliber miniature .36 caliber Colt 1851 and 1861 Navy percussion […]

50 Rounds Of .210″ Diameter Swaged Lead Shot, The Perfect Size For The Uberti 47% Scale Miniature Colt Walker, Dragoon, & 1860 Army Percussion Revolvers

, , , ,

This is 50 rounds of .210″ diameter swaged lead shot that is the perfect size lead projectile, ball, or bullet for the Uberti 47% scale caliber miniature .44 caliber Colt Walker, Dragoon, and 1860 Army […]

Carmen Gianforte Reproduction 2.7mm Kolibri Live Cartridge

, , , , ,

This is a modern made live 2.7mm Kolibri semi-automatic pistol cartridge made by master machinist Carmen Gianforte of Tennessee.  .437″ long overall, the case length is .38″, copper primer cup, lead projectile.  Both the primer […]

UBERTI NEW OLD STOCK UN-PLUGGED, FACTORY ROLL MARKED ONE LINE BARREL ADDRESS, 47% SCALE 7 1/2″ RIFLED BARREL WITH FRONT SIGHT FOR COLT SAA

,

This is a Uberti new old stock 47% scale 7 1/2″ rifled barrel for a Colt single action army.  Includes the staked in nickel silver front sight.  These barrels have the Uberti factory roll stamped […]

1/2 Scale Luger Manual

, ,

This is a 1/2 scale Luger manual printed by Kight Printing in Houston, Texas about 25 years ago.  I recently found a small supply of these.  The manual measures 3″ X 2″ by 1/4″.  Lots […]

UBERTI NEW OLD STOCK UN-PLUGGED 47% SCALE 12″ BUNTLINE RIFLED BARREL WITH FRONT SIGHT FOR COLT SAA

,

This is a Uberti new old stock 47% scale 12″ rifled “Buntline” barrel for a Colt single action army.  Includes the staked in front sight.  5 5/8″ long with a .21 caliber rifled bore.  Standard […]

UBERTI NEW OLD STOCK UN-PLUGGED 47% SCALE 7 1/2″ SMOOTHBORE BARREL WITH FRONT SIGHT FOR COLT SAA

,

This is a Uberti new old stock 47% scale smoothbore barrel for a Colt single action army.  Includes the staked in front sight.  3 1/2″ long with a .21 caliber bore.  Standard black blue finish, […]

UBERTI NEW OLD STOCK UN-PLUGGED 47% SCALE 4 3/4″″ RIFLED BARREL FACTORY BARREL ADDRESS & FRONT SIGHT FOR COLT SAA

, , ,

Project Description
This is a Uberti new old stock 47% scale rifled barrel for a Colt single action army.  Includes the staked in front sight.  2 1/4″ long with a .21 caliber bore.  Standard black blue […]

UBERTI NEW OLD STOCK UN-PLUGGED 47% SCALE 4 3/4″″ SMOOTHBORE BARREL WITH FRONT SIGHT FOR COLT SAA

, , ,

This is a Uberti new old stock 47% scale smoothbore barrel for a Colt single action army.  Includes the staked in front sight.  2 1/4″ long with a .21 caliber bore.  Standard black blue finish, […]

Uberti New Old Stock UN-PLUGGED 47% Scale 3″ Rifled Barrel With Front Sight For Colt SAA “Sheriff’s Model”

, , ,

This is a Uberti new old stock 47% scale rifled barrel for a Colt single action army “Sheriff’s Model”  Included the staked in front sight.  1 3/8″ long with a .21 caliber bore.   These barrels […]

Solid Brass Dummy Cartridges For Uberti And USHS Colt SAA Revolvers

,

These are an older generation of dummy cartridges made of solid yellow brass to fit the Uberti and United States Historical Society 47% scale Colt single action army revolvers.  These are one piece solid brass, […]