New Items

Miniart 1/2 Scale Small Ring Broom Handle Mauser Semi Automatic Pistol With Shoulder Stock Holster

, ,

This is a 1/2 scale “small ring” broom handle Mauser semi automatic pistol made by Miniart in Moscow, Russia about 20 years ago.  The pistol is 5 13/16″ long overall with a 2 23/32″ barrel […]

Toy Cap Gun Keychain

, ,

This is a toy cap gun keychain.  Marked MINI INTERPOL on the left side of the frame.  there is a marking on the right side but I can’t make it out.  Shows signs of having […]

11 Tiny Mite Toy Cap Guns With Original Cardboard Store Display

, ,

This is an original cardboard store display of Tiny Mite toy cap guns.  Made in Italy.  Includes the original cardboard, 11 Tiny Mite cap guns, 10 ramrods, and 8 strips of caps.  The cap guns, […]

Franz Pfannl Berloque 2mm Pinfire Urso A6a In Round Wood Case

, ,

This is a Franz Pfannl Berloque 2mm pinfire single shot pistol referred to as A6a “Flower Design” in Bob Urso’s book “The Tiniest guns – Third Edition”.  1 3/4″ long overall with a 5/8″ barrel.  […]

Franz Pfannl 2mm Berloque Pinfire Key Chain, NIB

, ,

This is a 2mm pinfire Berloque single shot pistol key ring made by Franz Pfannl in Austria and similar to Urso A5b – unmarked rabbit.  The difference is this one has a stamp on the […]

Paul Ellis 1/3 Scale Colt 1851 Navy Percussion Revolver Cased With Flask

This is a 1/3 scale Colt 1851 Navy percussion revolver supposedly by Paul Ellis.  4 3/8″ long overall with a 2 1/2″ octagon barrel of about .106 caliber.  Machined steel construction with a blue and […]

Japanese “Little Atom” 2mm Berloque Pinfire Single Shot Pistol Similar To Urso J3b

, ,

This is a Japanese made “Little Atom” 2mm pinfire Berloque single shot pistol similar to the piece referred to in Bob Urso’s book “The Tiniest Guns” as J3b, except this one has a rounded hammer […]

German Maus Berloque 2mm Pinfire Pistol Urso G5c Project

, ,

This is a German Maus 2mm Pinfire Berloque pistol referred to as G5c in Bob Urso’s book “The Tiniest Guns – Third Edition”.  The hammer is stiff & does not drop or feel like it […]

Bob Urso 1/4 Scale Colt Open Top Revolver In 2mm Pinfire

, , ,

This is a 1/4 scale Colt “Open Top” revolver made by The Tiniest Guns author Bob Urso of Washington State.  1 7/8″ long overall with a 11/16″ barrel of about .08 caliber.  This shoots the […]

John Sutherland 1/2 Scale Stevens Gem Single Shot Side Swing Derringer

, ,

This is a 1/2 scale Stevens GEM single shot side swing derringer made by John  Sutherland of Michigan.  2 1/4″ long overall with a 1 3/16″ barrel .125 caliber.  I’m pretty sure this takes the […]

Bob Urso 1/4 Scale Stevens Tip-Up Target Pistol In 2mm Pinfire

, , ,

This is a 1/4 scale Stevens “Tip-UP” target pistol that shoot the 2mm pinfire cartridges and made by The Tiniest Guns author Bob Urso of Washington State.  2 7/8″ long overall with a 2″ barrel […]

Uberti 47% Scale Colt Single Action Army Revolver With Smokeless Powder Frame & 7 1/2″ Barrel

, ,

This is a 47% scale miniature Colt single action army revolver Model of 1873 with 7 1/2 inch barrel made by Uberti in Italy.  Also known as the “Peacemaker” and “Frontier Six Shooter”.  Very scarce smokeless […]

Andres & Dworsky Cased Pair Of Single Shot Pistol Cufflinks NIB

, ,

This is a pair of Andres & Dworsky single shot pistol cufflinks that are new and sealed in the original plastic case.  The pistols and cufflink buttons are gold plated, the buttons with black reptile […]

Xythos 2MM Pinfire Revolver Cased Set

,

This is a Xythos miniature 2mm pinfire revolver cased set made in Austria.   1 5/8″ long overall with about a 5/8″ barrel.  Nickel plated finish except for the trigger, cylinder, and cylinder pin which are […]

Full Scale Unusual Belgian Double Barrel 5mm Pinfire Drop Trigger Pistol

, , ,

This is an unusual full scale Belgian double barrel pistol in 5mm pinfire with drop triggers.  4 5/16″ long overall with 1 7/8″ rifled barrels of about .22 caliber.  There is a lever under the […]

U.S. Historical Society Original Casing For Colt 1861 Navy Percussion Revolver With Shoulder Stock

This is an original U.S. Historical Society glass topped mahogany casing for their “Classic Edition” 1861 Colt Navy percussion revolver with detachable shoulder stock.  The glass top is etched with the Colt logo in the […]

!!!!!Price Reduced!!!!! Puma 1/3 Scale “Game Warden” Miniature Folding Pocket Knife

Price Further Reduced!!!  This is a 1/3 scale “Game Warden” single blade folding pocket knife made by Puma in Solingen, Germany in a limited edition of 500.  Puma stock number 620970.  2 3/4″ long overall […]

!!!!!Price Reduced!!!!! Puma 1/3 Scale Miniature Folding Pocket Knife

Price Further Reduced!!!  This is a 1/3 scale miniature single blade folding pocket knife made by Puma in Solingen, Germany.  2 3/8″ long opened, 1 7/16″ long closed.  the blade is made of AISI 420 […]

Puma 1/3 Original Scale Box And Leather Scabbard, No Knife

This is an original Puma green leatherette clam shell casing & leather scabbard for a fixed blade Puma miniature White Hunter knife Model 616375 made by Puma in Solingen, Germany in a limited edition of 500.  […]

Glass Topped Display Case

This is a hinged top glass topped oak display case with flip suitable for many miniature pistols.  Outer dimensions 9″ X 4 1/2″ X 2 3/16″.  Inter dimensions 7 1/2″ X 3 1/16″ X 1 […]

Tom Weston 1/2 Scale BelMex Single Shot Pistol, Cased

, , ,

This is a 1/2 scale BelMex 2mm rimfire single shot pistol by the legendary Tom P. Weston of Mexico City, Mexico, probably made from the mid 1940’s to early 1960’s.  2 3/16″ long overall with […]

Walnut & Mahogany Lift Top Casing, Unfitted

This is a nice walnut lift top casing with mahogany dust ledge and an alligator skin lined bottom suitable for most any 1/2 scale pistol or revolver.  Would also make a nice box to keep […]

Mahogany Casing For A Uberti 47% Scale Winchester Model 1866 Carbine

This is a mahogany hinged top casing made for a 47% scale Uberti Model 1866 Winchester carbine.  Exterior dimensions 19 7/8″ X 6 1/2″ X 2 3/16″.  Three hinges, eight magnetic closures.  Dovetailed corners.  The […]

Bob Urso 1/2 Scale French Delvigne 2MM Pinfire Derringer Serial # 1

, , ,

This is a 1/2 scale French Delvigne in 2mm pinfire derringer made by The Tiniest Guns author Bob Urso of Washington State.  1 3/4″ long overall with a 7/8″ barrel of about .078 caliber.  Nickel […]

Antique Full Size French Delvigne Derringer In 5mm Pinfire

,

This is an antique full scale French Delvigne derringer in 5mm pinfire.  3 5/8″ long overall with a 1 29/32″ barrel of about .216 caliber.  The barrel rotates to the left to load, and has […]

Miniart Hand Carved & Silver Wire Inlaid Walnut Casing For A 1/3 Scale Winchester 1894 Trapper Carbine With Bear

,

This is a 1/3 scale high relief, hand carved, and silver wire inlaid, walnut casing made by Miniart to fit one of their 1/3 scale 1894 Winchester trapper carbines.  The top is carved with a […]

OAK & ALLIGATOR LEATHER LUGGAGE TYPE CASING FOR A COLT SAA WITH 4 3/4″ OR 5 1/2″ BARREL OR SIMILAR SIZED PISTOL

This is a beautiful and very high quality oak and alligator leather luggage type casing for a pistol about the size of a 47% scale Uberti Colt single action army revolver with a 7 1/2″ […]

Miniart Hand Carved & Silver Wire Inlaid Walnut Casing For A 1/3 Scale Winchester 1894 Trapper Carbine With Moose

This is a 1/3 scale high relief, hand carved, and silver wire inlaid, walnut casing made by Miniart to fit one of their 1/3 scale 1894 Winchester trapper carbines.  The top is carved with a […]

Oak & Leather Luggage Style Casing For A Miniart 1/2 Scale Winchester 1894 Take Down Rifle

This is an oak and leather luggage or trunk style casing for a Miniart 1/2 scale Winchester 1894 octagon barreled take down rifle.  This is for the full rifle, not the short rifle.  The casing […]

Unknown Maker 1/4 Scale French Charleville Model 1766 Musket With Bayonet, Cased

, ,

This is a 1/4 scale French Charleville Model 1766 musket with bayonet as used by the continental forces in the American Revolutionary War, made by an unknown maker.  15″ long overall with a 11 1/16″ barrel […]

Uberti Consecutively Numbered Pair Of 47% Scale 1851 Navy Revolvers With Factory Barrel Addresses

, ,

This is a consecutively numbered pair of 47% scale 1851 Colt Navy percussion revolvers with factory roll stamped barrel addresses made by Uberti in Italy.  Fully functional, but non-firing. 6 1/4″ long overall with a […]

Miniart Hand Carved & Silver Wire Inlaid Walnut Casing For A 1/3 Scale Winchester 1894 Trapper Carbine

This is a 1/3 scale high relief, hand carved, and silver wire inlaid, walnut casing made by Miniart to fit one of their 1/3 scale 1894 Winchester trapper carbines.  The top is carved with a […]

Uberti Colt SAA Revolver, Factory Engraved, 4 3/4″ Barrel With Factory Roll Marked Barrel Address

, ,

This is a 47% scale Colt Single Action Army revolver made by Uberti in Italy.  4 3/4″ long overall with a 2 3/16″ rifled barrel of .21 caliber.  This piece is beautifully and extensively factory […]

OAK & ALLIGATOR LEATHER LUGGAGE TYPE CASING FOR A COLT SAA WITH 7 1/2″ BARREL OR SIMILAR SIZED PISTOL

This is a beautiful and very high quality oak and alligator leather luggage type casing for a pistol about the size of a 47% scale Uberti Colt single action army revolver with a 7 1/2″ […]

Miniart 1/3 Scale 1894 Winchester Octagon Barreled Rifle

, ,

This is a 1/3 scale miniature Winchester Model 1894 octagon barreled, full magazine, straight gripped, crescent buttplate rifle made by Miniart in Moscow, Russia about 15 years ago.  13 9/16″ long overall with an 7 7/16″ […]

Miniart 1/3 Scale 1894 Winchester Trapper Saddle Ring Carbine

, ,

This is a 1/3 scale miniature Winchester Model 1894 “Trapper” saddle ring carbine made by Miniart in Moscow, Russia about 15 years ago.  11 5/16″ long overall with a 5 1/4″ round barrel of about […]

Aldo Uberti’s Personal 47% Scale Henry Rifle, Serial # 1AU, One Of Only Four Made, And The Only One In The U.S.

, , , ,

In my opinion, Aldo Uberti did more to stimulate the miniature firearms collecting hobby than everyone else in history put together.  Aldo loved miniatures, and had his craftsmen make him many different miniatures of Colt […]