Knives & Swords

!!!!!Price Reduced!!!!! Puma 1/3 Scale “Game Warden” Miniature Folding Pocket Knife

Price Further Reduced!!!  This is a 1/3 scale “Game Warden” single blade folding pocket knife made by Puma in Solingen, Germany in a limited edition of 500.  Puma stock number 620970.  2 3/4″ long overall […]

!!!!!Price Reduced!!!!! Puma 1/3 Scale Miniature Folding Pocket Knife

Price Further Reduced!!!  This is a 1/3 scale miniature single blade folding pocket knife made by Puma in Solingen, Germany.  2 3/8″ long opened, 1 7/16″ long closed.  the blade is made of AISI 420 […]

Jaguar Miniature Single Blade Folding Knife With Red bone Handles

This is a miniature single blade folding knife with red bone handles.  The knife was made in Italy and the left side of the blade is marked Jaguar.  1 7/8″ long overall with the blade […]

Inox Miniature Single Blade Folding Knife

This is a miniature single blade folding pocket knife made by INOX, and so marked on the left rear of the blade.  2 3/4″ long overall with the blade open not counting the hanging ring. […]

Jaguar Miniature Single Blade Folding Knife Made In Italy

This is a miniature single blade folding knife marked Jaguar, Italy in two lines on the left rear of the blade.  2 7/8″ long overall with the blade open.  1 5/8″ long overall with the […]

Miniature Bowie Knife By An Unknown Maker

This is a miniature Bowie knife by an unknown maker.  2 13/16″ long overall with a 1 9/16″ blade.  The top edge of the blade with some nice file work.  the left side of the […]

Miniature Stag Handled Skinning Knife By An Unknown Maker

This is a miniature stag handled skinning knife by an unknown maker.  2 3/8″ long overall with a 1 1/16″ spear point blade.  Yellow brass guard.  The stag handles held in place by 3 yellow […]

T. M. Enos Miniature Bowie Knife Dated 1974

This is a miniature Bowie knife made by famed knife maker T. M. Enos dated 1974, and so marked on the left side of the blade.  3 13/16″ long overall with a 2 1/4″ drop […]

1/4 Scale Hatchet

,

This is a 1/4 scale hatchet by an unknown maker.  The head measures 1 1/4″ X 11/16″ (at the edge) X 3/16″ thick.  The head is finely made of steel and finished in the white. […]

Alan Krouse 1/3 Scale Belt Or Hunting Knife

Price Reduced!!!  This is a 1/3 scale belt or hunting knife made by master knife Alan Krouse of Humble, Texas, probably in the 1990’s.  3 1/4″ long overall with a 1 7/8″ blade.  The left […]

!!!!!Price Reduced!!!!! Al Eaton 1/4 Scale Damascus Blade Bowie Knife with Stag Handle

Price Reduced!!!  This is a 1/4 scale Bowie knife made by master knife maker Al Eaton of Clayton, Ca.  3 11/16″ long overall with a 2 7/16″ drop point Damascus blade.  The cross guard looks […]

Alan Krouse 1/3 Scale Hollow Ground Skinning or Butcher Knife

Price Reduced!!!  This is a 1/3 scale hollow ground skinning or butcher knife made by master knifemaker Alan Krouse of Humble, Texas, probably in the 1990’s.  5 1/16″ long  overall with a 3 9/32″ long […]

Jerry Missimer 1/2 Scale Remington R1303 “Bullet” Knife

,

Price Reduced!!!  This is a 1/2 scale Remington R1303 single blade bullet knife made by master miniature maker Jerry Missimer. 3 1/16″ long overall open, 2 3/4″ long overall closed. The handles are jigged bone […]

1/4 Scale Miniature Sabre With Scabbard

This is a 1/4 scale miniature saber by an unknown maker.  9 5/8″ long overall in the scabbard.  The sword itself is 8 11/16″ long with a 6 15/16″ unetched high quality steel blade, the […]

Jerry Missimer 1/3 Scale Pole Arm Halberd Or Pike #3

, , ,

This is a 1/3 scale pole arm usually known as a halberd or pike, made by master miniature maker Jerry Missimer of Pennsylvania.  21 13/16″ long overall with a 3 9/16″ fancy hand forged steel […]

Jerry Missimer 1/3 Scale Pole Arm Halberd Or Pike #2

, , ,

This is a 1/3 scale pole arm usually known as a halberd or pike, made by master miniature maker Jerry Missimer of Pennsylvania.  21 7/8″ long overall with a 3 3/4″ fancy hand forged steel […]

Unknown 1/6 Scale Peace Pipe Tomahawk

,

This is a 1/6 scale peace pipe tomahawk by an unknown maker.  The handle is 3 7/8″ long and about 1/4″ in diameter at it’s largest point.  The blade looks to be cast steel, then […]

Unknown 1/2 Scale Machete

This is a 1/2 scale Machete by an unknown maker.  9 11/16″ long overall with a 7 1/8″ spear point blade.  The carbon steel blade looks to be nickel plated, and some of the nickel […]

Unknown 1/4 Scale Double Edge Spear Point Fighting or Bowie Knife With Damascus Blade

This is a 1/4 scale double edge spear point fighting or Bowie knife with a Damascus blade and checkered wood scales.  3 1/2″ long overall with a 2 5/16″ blade.  Oval yellow brass cross guard […]

1/2 scale gentleman’s slacks single blade pocket knife

This is a 1/2 scale gentleman’s slacks folding pocket knife. 2 3/4″ long overall open with a 1″ blade. 1 3/4″ closed. I believe the handles are gold plated or gold filled. The blade is […]

1/2 scale German WWII SS dagger with walnut casing

This is a walnut hinged top casing specially made for the included 1/2 scale World War II German SS dagger. The dagger is complete with the chained hanger, portapee, and tool. 7 1/4″ long overall […]

1/3 scale drop point Bowie knife blades for the “Do it yourselfer”

These are 1/3 scale miniature drop point Bowie knife blades for the “Do it yourself” knife maker. One is stainless steel, the other is Damascus steel. The blades are 4 9/16″ long overall including the […]

1/2 Scale WWII German SS Chained Dagger

This is a 1/2 scale World War II German SS dagger complete with chained hanger, portapee, and tool. 7 1/4″ long overall in the scabbard. The dagger itself measures 6 11/16″ long with a 4 […]

1/2 Scale WWII German SA Dagger

This is a 1/2 scale World War II brown German SA dagger complete with leather hanger, portapee, and tool. 7 1/4″ long overall in the scabbard. The dagger itself measures 6 11/16″ long with a […]