Cases

OAK & ALLIGATOR LEATHER LUGGAGE TYPE CASING FOR A COLT SAA WITH 4 3/4″ OR 5 1/2″ BARREL OR SIMILAR SIZED PISTOL

,

!!!!!LAST ONE!!!!!

!!!!!ON HOLD!!!!!  This is a beautiful and very high quality oak and alligator leather luggage type casing for a pistol about the size of a 47% scale Uberti Colt single action army revolver with […]

Walnut Casing For Miniart P-08 Luger Semi-Auto Pistol With Manual

, ,

!!!!!Found 1 More!!!!! 

This is a hinged top walnut casing with key lock made by Wayne Hoosier of Dickenson, Texas to fit the Miniart 1/2 scale Erfurt and Kreighoff P-08 Luger semi-automatic pistols.   The case […]

Mahogany Casing For A Uberti 47% Scale Winchester Model 1866 Carbine

This is a mahogany hinged top casing made for a 47% scale Uberti Model 1866 Winchester carbine.  Exterior dimensions 19 7/8″ X 6 1/2″ X 2 3/16″.  Three hinges, eight magnetic closures.  Dovetailed corners.  The […]

Miniart Hand Carved & Silver Wire Inlaid Walnut Casing For A 1/3 Scale Winchester 1894 Trapper Carbine With Bear

,

This is a 1/3 scale high relief, hand carved, and silver wire inlaid, walnut casing made by Miniart to fit one of their 1/3 scale 1894 Winchester trapper carbines.  The top is carved with a […]

Miniart Hand Carved & Silver Wire Inlaid Walnut Casing For A 1/3 Scale Winchester 1894 Trapper Carbine With Moose

This is a 1/3 scale high relief, hand carved, and silver wire inlaid, walnut casing made by Miniart to fit one of their 1/3 scale 1894 Winchester trapper carbines.  The top is carved with a […]

Oak & Leather Luggage Style Casing For A Miniart 1/2 Scale Winchester 1894 Take Down Rifle

This is an oak and leather luggage or trunk style casing for a Miniart 1/2 scale Winchester 1894 octagon barreled take down rifle.  This is for the full rifle, not the short rifle.  The casing […]

Miniart Hand Carved & Silver Wire Inlaid Walnut Casing For A 1/3 Scale Winchester 1894 Trapper Carbine

This is a 1/3 scale high relief, hand carved, and silver wire inlaid, walnut casing made by Miniart to fit one of their 1/3 scale 1894 Winchester trapper carbines.  The top is carved with a […]

1/2 Scale Colt Key Lock For Wood Casings

,

This is a 1/2 scale case lock specifically made for miniature Colt wood casings, but which will of course work for any miniature gun casing.  These were made by Roberto Hinze in Houston, Texas about […]

Pine Shipping Crate Casing For Uberti 47% Scale Colt Walker Percussion Revolver

This is a pine shipping crate type casing made by Imperial Miniature Armory to fit the Uberti or U.S. Historical Society 47% scale Colt Walker revolvers.  Would also work for the Uberti Colt dragoon revolvers. […]

Walnut Casing For Miniart 1/3 Scale Colt Paterson Revolver & Accessories

This is a walnut casing only for a 1/3 scale Colt Paterson percussion revolver & accessories as made by Miniart in Moscow, Russia.  The casing was made by Imperial Miniature Armory in Richmond, Texas.  Hinged […]

U.S. Historical Society Colt SAA “Classic Edition” Mahogany Casing Only

This is an original United States Historical Society hinged top mahogany casing with slide latch for their “Classic Edition” Colt single action army revolver.  The front right corner of the top is marked with the […]

Miniart Deluxe Walnut Case For 1/4 Scale Thompson 1928 And M-1

, ,

This is a deluxe walnut case made by Miniart in Moscow, Russia for their 1/4 scale Thompson sub-machine guns models 1928 and M-1.  Outside dimensions are 14 1/16″ X 5 3/8″ X 1 13/16″.  Inside […]

IMA 1/2 Scale Canuck Wood Shotshell Crate

, ,

This is a 1/2 scale empty crate for 20 boxes of Canuck 16 gauge shotshells made by Imperial Miniature Armory of Richmond, Texas.  Outside dimensions are 7 9/16″ wide (not counting the wood handles), 4 […]

Glass Top Casing For Uberti Or USHS 47% Scale Colt 1851 Navy Percussion Revolver

This is a hinged glass topped casing for the Uberti or United Stated Historical Society 47% scale Colt 1851 navy percussion revolver.  It is very similar and patterned after the USHS Presidential Edition cases.  Outside […]

1/4 Scale Crate Type Casing For Miniart M-1 Thompson Sub-Machine Gun

This is a crate type casing for a Miniart 1/4 scale Thompson sub-machine gun made by Wayne Hoosier of Dickenson, Texas.  Outside dimensions are 9 1/2″ X 3 1/4″ X 2″.  Made for the Miniart […]