Wayne Driskill Miniature Firearms - Home Page
Cases

   
   
 
Uberti-Colt-SAA-oak-casing-2.JPG

This is an oak contemporary type casing for the 47% scale Colt Single Action Army revolvers as made by Uberti or the United States Historical Society.  These cases were made and sold by Uberti in Italy in the very early days of their miniature business.  The case measures 7 1/4" X 4" X 1 1/4".  Straight grained oak, two brass hinges.  The case interior is English fit with a medium green lining.  The case corners are mitered.  This is made to fit the 7 1/2" barrel version, but the shorter ones will also work in a pinch.  Has a Colt instruction label on the inside of the lid that is not shown in the photo.  A great accessory for your Uberti or United States Historical Society 47% scale Colt SAA revolver.  Miniature Colt SAA and accessories available separately.
 
 
Price:  $250.00

IMA-Colt-SAA-walnut-key-lock-casing-2.JPG

 This is a walnut contemporary type casing made by Wayne Hoosier for the Uberti and U.S. Historical Society 47% scale Colt Single Action Army revolvers.  The case measures 7" X 3 7/16" X 1 3/8".  Straight grained walnut, two brass hinges and a miniature Colt key lock.  The case interior is English fit with a dark purple velour lining.  The case corners are mitered and splined.  This is made to fit the 7 1/2" barrel version, but the shorter ones will also work in a pinch.  Has a Colt instruction label on the inside of the lid.  Includes the proper key for the lock and a dummy .45 Colt cartridge box.  A great accessory for your Uberti or United States Historical Society 47% scale Colt SAA revolver.  Miniature Colt SAA and accessories available separately.

Photo 2

Price:  $200.00

IMA-Colt-SAA-walnut-unfinished-casing-2.JPG

This is a walnut contemporary type casing made by IMA for the Uberti and U.S. Historical Society 47% scale Colt Single Action Army revolvers.  The case measures 7 15/16" X 4 3/16" X 1 5/8".  Straight grained walnut.  Two brass hinges.  The case interior is English fit with a russet brown velour lining.  The case corners are mitered and splined.  The top of the case has a high relief carved likeness of a Colt SAA with 7 1/2" barrel.  This is made to fit the 7 1/2" barrel version, but the shorter ones will also work in a pinch.  Has a Colt instruction label on the inside of the lid which is not shown in the photo.  Includes a dummy .45 Colt cartridge box.  There is a compartment lid which has not been finished and needs a knob, and the case is missing the wood piece that would hold the dummy cartridges.  A great accessory for your Uberti or United States Historical Society 47% scale Colt SAA revolver.  Miniature Colt SAA and accessories available separately.

Photo 2

Price:  $200.00

KucerUbertipercussioncasing1.jpg

This is a great walnut contemporary type casing for the 47% scale Colt 1851 navy, 1860 army, and 1861 navy revolvers as made by Uberti or the United States Historical Society.  These cases were made by master miniature makers David and Zavie Kucer in Canada.  The cases measures 7 3/4" X 1 5/8" X 1 1/4".  Straight grained walnut, full length brass hinge, magnetic closure.  The cases are English fit with a russett velour lining on the interior bottom and a padded russett silk interior lid.  The corners are mitered and splined just as a typical antique Colt casing would be.  A great accessory for your Uberti or United States Historical Society 47% scale Colt percussion revolvers.  Miniature Colts and accessories available seperately.

Photo 2,  Photo 3,  Photo 4

Price:  $250.00

IMA-Colt-SAA-walnut-not-partitioned-casing-2.JPG

This is a walnut contemporary type casing made by IMA for the Uberti and U.S. Historical Society 47% scale Colt Single Action Army revolvers.  The case measures 8 5/16" X 4 1/4" X 1 11/16".  Straight grained walnut.  Two brass hinges.  The case interior has not been partitioned.  The top and bottom are lined in a red suede.  The case corners are mitered and splined.  The top of the case has a high relief carved likeness of a Colt SAA with 7 1/2" barrel in an oval depression.  This was made to fit the 7 1/2" barrel version, but the shorter ones will also work in a pinch.  Has a Colt instruction label on the inside of the lid which is not shown in the photo.  Do the partitioning yourself to fit your miniature and the accessories you want to include.  A great accessory for your Uberti or United States Historical Society 47% scale Colt SAA revolver.  Miniature Colt SAA and accessories available separately.

Photo 2

Price:  $200.00