| |
|
This is a 47%
scale Colt 12" barreled "Buntline" revolver as issued by America Remembers. These were made by Uberti
in Italy under license from Colt. This is the "Presidential Edition" and if beautifully factory engraved.
8 1/4" long overall with a 5 5/8" long rifled barrel of .21 caliber. Blue finish with the exception of the
frame, loading gate, & hammer which are case colored. The top of the barrel is roll stamped with the one line italics
barrel address. The left front of the frame marked with the patent dates in two lines. The caliber marking ".45
CAL" stamped into the left side of the triggerguard. The engraving is well executed with about 50% coverage.
Nicely figured one piece rosewood grips. The serial number "21" stamped into the bottom of the frame, triggerguard,
and backstrap. The top of the frame has the long range stand up adjustable sight. Complete with the original America
Remembers glass top casing with hinged top. The Colt logo etched into the glass near the left front corner of the top.
The interior is French fit with a burgundy velour lining. There is also a brass plaque inset into the case interior
just below the revolver with the America Remembers data. Not many of these were made or sold and they are rarely available. Photo 2, Photo 3, Photo 4, Photo 5, Photo 6, Photo 7, Photo 8, Photo 9, Photo 10, Photo 11, Photo 12, Photo 13, Photo 14, Photo 15, Photo 16, Photo 17 Price: $1,000.00 |
|
|
This is a great 1/3 scale Chicago palm pistol
made by master miniature maker Andrew Dyson in England. Fully functional. Checkered
hard rubber side panels and grip. Additional photos available upon request. Price: $1,795.00
|
|
|
This
is a 47% scale Colt 1861 Navy revolver with detachable shoulder stock by the U.S. Historical society, serial #19. Factory
engraved, factory roll marked barrel address, 36 cal marked on the left rear of the trigger guard. Originally this miniature
was all silver plated. This miniature however has a gold plated the cylinder, loading lever, loading rammer, trigger, and
hammer. The original walnut grip has been replaced with a gorgeous elephant ivory grip that is very finely checkered and high
relief carved by master ivory carver Dennis Holland. These grips are very finely checkered with full coverage on both sides
with the exception of where the high relief carved eagle with shield is on the left side. Cased in a nice mahagony casing
and complete with powder flask, silver plated bullet mold, silver plated combination nipple wrench/screwdriver, nickel plated
oil bottle, cartridge packet, cap tin, and loading instructions lid label.
Colt 1861 Navy, gold & silver plated with shoulder stock photo 2
Colt 1861 Navy, gold & silver plated with shoulder stock photo 3
Colt 1861 Navy, gold & silver plated with shoulder stock photo 4
Colt 1861 Navy, gold & silver plated with shoulder stock photo 5
Colt 1861 Navy, gold & silver plated with shoulder stock photo 6
Colt 1861 Navy, gold & silver plated with shoulder stock photo 7
Colt 1861 Navy, gold & silver plated with shoulder stock photo 8
Price: $1,500.00 |
This is a 47% scale miniature Colt 1847
Walker revolver as issued by the United States Historical Society in the 1980's. This is the standard or "Classic Edition".
These were made by Uberti in Italy under license from Colt for the USHS. 7 1/4" long overall with a 4 1/4" long
rifled barrel. Blue and casecolored finish, brass triggerguard, with pretty one piece walnut grips. Serial # marked on
the bottom of the barrel lug, frame, triggerguard, backstrap, and on the side of the cylinder. The cylinder properly roll
engraved with the Ormsby cylinder scene. The right side of the barrel lug marked US, 1847 on two lines just above the wedge.
The top of the barrel roll stamped with the proper Colt barrel address. Complete with the original mahogany slide latch hinged
top casing with the Colt logo stamped into the top right front corner. French fit with a gray velour lining.
The interior fitted with the USHS brass plaque. Also includes the original manilla bottom with brown lift of top shipping
box. Photo 2, Photo 3, Photo 4, Photo 5, Photo 6, Photo 7, Photo 8, Photo 9, Photo 10, Photo 11, Photo 12, Photo 13, Photo 14 Price: $600.00 |
|
This is a pretty 47% scale Colt single action
army revolver by Uberti in Italy. 6" long overall with a 3 17/32" barrel. Black powder frame, nickel
finish, 7 1/2 inch .21 caliber rifled barrel. Beautiful elephant ivory grips by master ivory carver Dennis Holland.
The Colt patent dates are stamped into the left front of the frame and the caliber marking is stamped into the left rear of
the trigger guard. The Uberti maker's mark is stamped into the bottom of the barrel. Knurled hammer spur.
Complete with an original Uberti oak casing, English fit with dark green velour lining. The case includes
20 dummy cartridges with solid brass cases and silver colored bullets. The cartridges are even headstamped
W-W 45 COLT. You don't see these original Uberti cases much. Photo 3, Photo 4, Photo 5, Photo 6, Photo 7, Photo 8, Photo 9 Price: $850.00 |
|
|
