Wayne Driskill Miniature Firearms - Home Page
Semi-Auto Pistols

 
Miniart-P08-Luger-Duget-Engraved-1.1.JPG

This is a 1/2 scale P-08 German Luger semi-automatic pistol made by Miniart in Moscow, Russia circa 1993.  The high polish blue finish, 22 karat gold wire inlays, and ivory grips were beautifully executed by master engraver Thierry Duget.  4 1/4" long overall with a 1 15/16" rifled barrel of 4.5mm bore.  High polished blued machined steel.  Bone grips with a single retaining screw at the bottom of each.  Serial number 51 stamped into the left front of the frame. 1912 is inlaid in 22 karat gold into the top front of the frame over the chamber area of the barrel. The Erfurt with crown logo on the top of the toggle is 22 karat gold inlaid.  The muzzle inlaid with 2 gold bands.  The top, sides, rear of the frame, and sides of the magazine well are outline bordered in 22 karat gold wire inlays. The rear of the frame above the safety marked GESICHERT.  Fixed rear sight. The takedown lever, magazine release, and the sides of the toggles are very finely checkered.  The back of the front sight, the tops of the toggles, and the top of the safety are serrated.  The body of the magazine is finished in the white, the magazine bottom is black anodized aluminum.  Fully functional, this miniature will feed, chamber, extract, and eject the included 8 solid steel 1/2 scale dummy 9mm parabellum cartridges. Functional safety. Mint new condition.  Includes a 1/2 scale miniature Luger manual, and a nice deluxe casing.  The black leather covered hinged top casing has two front slide latches.  The interior is lined in a royal blue velour, the bottom with a burgundy rope perimeter edging.  Thierry's craftsmanship on the polishing, gold inlays, and ivory grips is really just superb, and must be seen "in hand" to fully appreciate the beauty!  Thierry made four of these.  Two cased singles, of which this is one, and a cased pair, serial numbers 08 and 10, which are shown on page 122 of the book "The Art of Miniature Firearms, Centuries of Craftsmanship".

Photo 2, Photo 3, Photo 4, Photo 5, Photo 6, Photo 7, Photo 8, Photo 9, Photo 10, Photo 11, Photo 12, Photo 13, Photo 14, Photo 15, Photo 16, Photo 17, Photo 18, Photo 19, Photo 20, Photo 21, Photo 22, Photo 23, Photo 24

Price:  $3,750.00

Unknown-2-5ths-Luger-carbine-7839-1.JPG

A 2/5 scale 1902 Luger carbine by the same unknown maker as the P-08 Luger to the left, cased with extra magazine and detachable shoulder stock.  Beautiful workmanship & fully functional!  The pistol measures 6 11/16" long overall with a 4 3/4" barrel with a bore of .137 caliber.  11 7/8" long overall with the stock attached.  Functional grip safety.  The finish is a high polish blue, with straw colored small parts.  Checkered walnut two piece grips with a single screw at the bottom of each side.  Checkered walnut forearm with a wedge retainer and a sling swivel.  There are two German silver escutcheons, held in place by two screws each, on each side of the forearm for the wedge to pass through.  The front sight has a serrated ramp with a dovetailed blade type front sight.  The rear barrel sight is adjustable and calibrated for 100, 200, and 300 meters.  The top of the slide marked 1902 just in front of the chamber.  The top of the toggle marked with the DWM intertwined logo.   The rear of the frame above the safety is marked GESICHERT.  The frame, barrel, and both wood magazine bottoms are serial numbered 7839.  The take down lever, frame side plate, two pieces of the toggle are marked 39.  The stock does not show any numbers.  Near mint condition showing only very minor signs of handling wear, the sideplate, toggle parts, and grip safety starting to darken a little.  Complete with what looks to be the original walnut hinged top key lock casing, the lid with a centered flush inlaid rectangular brass escutcheon.  The interior is French fit with an unlined bottom.  The lid is lined in a russet brown suede leather.

Photo 2, Photo 3, Photo 4, Photo 5, Photo 6, Photo 7, Photo 8, Photo 9, Photo 10, Photo 11, Photo 12, Photo 13, Photo 14, Photo 15, Photo 16, Photo 17, Photo 18, Photo 19, Photo 20, Photo 21, Photo 22, Photo 23, Photo 24, Photo 25, Photo 26, Photo 27, Photo 28, Photo 29, Photo 30, Photo 31, Photo 32, Photo 33, Photo 34, Photo 35, Photo 36

Price:  $5,000.00.

Unknown-2-5ths-P-08-Luger-7837-1.JPG

A 2/5 scale P-08 Luger by the same unknown maker as the Luger carbine to the right.  Cased with extra magazine, detachable shoulder stock, and tools.  Beautiful workmanship and fully functional!  3 9/16" long overall with a 1 5/8" barrel of .139 caliber.  8 7/8" long overall with the stock attached.  Blue steel finish with the small parts straw colored.  The top of the slide marked 1940 over the chamber.  The top of the toggle marked with the H K logo.  The frame, barrel, slide, and magazine bottoms marked 7837.  37 is stamped into many of the small parts.  Finely checkered two piece walnut grips with a screw securing them at the bottom on each side.  Accessories include the shoulder stock, a cleaning rod with oiler, a take down tool, and a punch.  Complete with the original walnut hinged top casing with key lock.  No key.  The interior bottom French fit and unlined.  The interior top lined in a russet brown suede.  The interior bottom drilled to accept 40 cartridges, none of which are present.  Near mint condition showing only the most minor signs of handling wear.

Photo 2, Photo 3, Photo 4, Photo 5, Photo 6, Photo 7, Photo 8, Photo 9, Photo 10, Photo 13, Photo 14, Photo 15, Photo 16, Photo 17, Photo 18, Photo 19, Photo 20, Photo 21, Photo 22, Photo 23, Photo 24, Photo 25, Photo 26, Photo 27, Photo 28, Photo 29, Photo 30, Photo 31, Photo 32, Photo 33, Photo 34, Photo 35, Photo 36, Photo 37, Photo 38, Photo 39, Photo 40, Photo 41, Photo 42, Photo 43, Photo 44

Price:  $3,500.00.

Miniart-Navy-Luger-15-1.1.JPG

This is a 1/2 scale DWM Navy Luger made by Miniart In Moscow, Russia about 1994.  5 5/16" long overall with a 2.9" barrel of .173 caliber.  Blue finish with straw colored trigger, safety, takedown lever, and magazine release.  Checkered walnut grips with a retaining screw at the bottom on both sides.  The top of the receiver in front of the bolt marked 1917.  The top of the toggle marked with the intertwined DWM logo.  Adjustable rear sight, dovetailed front sight.  The side of the frame marked with the serial number 15.  The rear of the frame above the safety marked GESICHERT.  The takedown lever, magazine release, the sides of the rear sight, and the sides of the toggles are checkered.  The back of the front sight, the tops of the toggles, and the top of the safety are serrated.  The body of the magazine is blue steel.  The magazine bottom is black anodized aluminum.  Complete with three original rounds of solid steel dummy ammunition which will feed, chamber, extract, and eject when the action is manually operated.  Mint condition showing no signs of handling, I'd call it 99.9%.  These are getting increasingly more difficult to find.  Also included is a miniature 1/2 scale Luger manual.

Photo 2, Photo 3, Photo 4, Photo 5, Photo 6, Photo 7, Photo 8, Photo 9, Photo 10, Photo 11, Photo 12, Photo 13, Photo 14, Photo 15, Photo 16, Photo 17, Photo 18, Photo 19, Photo 20

 Stock # FF-2, Price:  $2,100.00

 

Miniart-P08-Luger-77-1.1.JPG

This is a 1/2 scale German P-08 Army Luger made by Miniart in Moscow, Russia about 1993. 4 1/4" long overall with a 1 15/16" rifled barrel of 4.5mm bore. Blue finish with straw colored trigger, safety, takedown lever, and magazine release.  Checkered walnut grips with a single retaining screw at the bottom of each. Serial # 77 stamped into the left front of the frame. 1912 is stamped into the top front of the frame over the chamber area of the barrel. Erfurt with crown logo stamped into the top of the toggle. Fixed rear sight, dovetailed front sight.  The rear of the frame above the safety marked GESICHERT.  The takedown lever, magazine release, the sides of the rear sight, and the sides of the toggles are checkered.  The back of the front sight, the tops of the toggles, and the top of the safety are serrated.  The body of the magazine is finished in the white.  The magazine bottom is black anodised aluminum.  Fully functional, this miniature will feed, chamber, extract, and eject the included 8 solid steel dummy cartridges.  Functional safety and loaded chamber indicator.  Mint condition.  Includes an oak and walnut hinged top casing with push button latch.  The interior bottom French fit and lined in green felt.  The interior top is padded and lined in green felt.  Also includes a 1/2 scale miniature Luger manual.

Photo 2, Photo 3, Photo 4, Photo 5, Photo 6, Photo 7, Photo 8, Photo 9, Photo 10, Photo 11, Photo 12, Photo 13, Photo 14, Photo 15, Photo 16, Photo 17, Photo 18, Photo 19, Photo 20, Photo 21, Photo 22, Photo 23, Photo 24, Photo 25, Photo 26

Price:  $2,250.00

A brown leather holster is available for this piece for an additional $150.00 

 

 

 

 

Miniart-P-08-Luger-45-1.1.JPG

This is a 1/2 scale P-08 Army Luger made by Miniart in Moscow, Russia about 1993. 4 1/4" long overall with a 1 15/16" rifled barrel of 4.5mm bore. Blue finish with straw colored trigger, safety, takedown lever, and magazine release.  Checkered walnut grips with a single retaining screw at the bottom of each. Serial # 45 stamped into the left front of the frame. 1912 is stamped into the top front of the frame over the chamber area of the barrel. The Erfurt with crown logo stamped into the top of the toggle. Fixed rear sight.  The rear of the frame above the safety marked GESICHERT.  The takedown lever, magazine release, the sides of the rear sight, and the sides of the toggles are checkered.  The back of the front sight, the tops of the toggles, and the top of the safety are serrated.  The body of the magazine is blue steel.  The magazine bottom is black anodised aluminum.  Fully functional, this miniature will feed, chamber, extract, and eject the included 3 solid steel dummy cartridges. Functional safety. Mint condition. Includes a 1/2 scale miniature brown leather Luger holster, the sardine can key type cleaning rod, and a Luger manual.

Photo 2, Photo 3, Photo 4, Photo 5, Photo 6, Photo 7, Photo 8, Photo 9, Photo 10, Photo 11, Photo 12, Photo 13, Photo 14, Photo 15, Photo 16, Photo 17, Photo 18, Photo 19, Photo 20, Photo 21, Photo 22, Photo 23, Photo 24, Photo 25, Photo 26, Photo 27, Photo 28, Photo 29, Photo 30

Stock # FF-1, Price:  $2,250.00

 

Miniart-Browning-HP-fixed-031-LC-11-1.JPG

 

This is a 1/2 scale Browning Hi-Power pistol with the standard fixed rear sight made by Miniart in Russia.  4 1/8" long with a 1 13/16" barrel of .174 caliber.  Blue finish, two piece checkered walnut grips.  The left side of the slide with the proper Browning markings.  The serial number, 031, stamped into the barrel, slide, and frame on the right side.  100% fully functional and complete with three rounds of solid steel dummy ammunition which will feed, chamber, extract, and eject when the action is cycled manually.  Complete with a nice glass topped walnut case.  The interior French fit and lined in a dark red velour.  The glass lid (not shown) slides in and out from the right side.  Mint condition.

Photo 2, Photo 3, Photo 4, Photo 5, Photo 6, Photo 7, Photo 8, Photo 9, Photo 10, Photo 11, Photo 12, Photo 13, Photo 14, Photo 15, Photo 16, Photo 17, Photo 18, Photo 19, Photo 20, Photo 21

 

Stock # LC-11, Price:  $1,800.00

Miniart-Browning-HP-std-sights-020-1.JPG

This is a 1/2 scale Browning Hi-Power pistol with the standard fixed rear sight by Miniart in Russia.  100% fully functional.  3 15/16" long overall with a 2 5/16" rifled barrel of 4.5mm bore.  Blue finish, two piece checkered walnut grips.  The left side of the slide with the proper Browning markings.  The serial number, 020, stamped into the barrel, slide, and frame on the right side.  Fully functional and complete with three rounds of solid steel dummy ammunition which will feed, chamber, extract, and eject when the action is cycled manually.  Mint condition.

Photo 2, Photo 3, Photo 4, Photo 5, Photo 6, Photo 7, Photo 8, Photo 9

Price:  $1,750.00

Miniart-Colt-1911-A1-eng-024-G70-1.JPG

!!!!!SALE!!!!! 

This is a 1/2 scale Colt 1911 A-1 made by Miniart in Russia and engraved by master engraver Tom Hicks of Texas.  4 1/4" long overall with a 2 15/32" .22 caliber rifled barrel.  Beautifully scroll engraved with about 75% coverage.  Blue finish. Two piece checkered walnut grips.  Serial #, 024 G 70.  The slide and frame properly marked.  Fully functional and will feed, chamber, extract, and eject the included three solid steel dummy cartridges when the action is cycled manually.  Complete with a great hinged top key lock walnut casing, no key.  The interior French fit and lined in purple felt.  Includes a miniature cartridge box and a miniature Colt instruction manual.

Photo 2, Photo 3, Photo 4, Photo 5, Photo 6, Photo 7, Photo 8, Photo 9, Photo 10, Photo 11, Photo 12, Photo 13, Photo 14, Photo 15, Photo 16, Photo 17

!!!!!SALE!!!!!,  Price:  $2,650.00